Effects of water stress on nutrients and enzyme activity in rhizosphere soils of greenhouse grape.

In grape cultivation, incorrect water regulation will lead to significant water wastage, which in turn will change soil structure and disrupt soil nutrient cycling processes. This study aimed to investigate the effects of different water regulation treatments [by setting moderate water stress (W1), mild water stress (W2), and adequate water availability (CK)] on soil physical-chemical properties and enzyme activity in greenhouse grape during the growing season. The result showed that the W2 treatment had a negative impact on the build-up of dissolved organic carbon (DOC), nitrate nitrogen (NO3-N), and available phosphorus (AP). Throughout the reproductive period, the W1 and W2 treatments decreased the soil's microbial biomass carbon (MBC) and microbial biomass nitrogen (MBN) contents, and MBC was more vulnerable to water stress. During the growth period, the trends of urease, catalase, and sucrase activities in different soil depth were ranked as 10-20 cm > 0-10 cm > 20-40 cm. The urease activity in 0-10 cm soil was suppressed by both W1 and W2 treatments, while the invertase activity in various soil layers under W1 treatment differed substantially. The W1 treatment also reduced the catalase activity in the 20-40 cm soil layer in the grape growth season. These findings suggested that W2 treatment can conserve water and enhance microbial ecology of greenhouse grape soils. Therefore, W2 treatment was the most effective water regulation measure for local greenhouse grape cultivation.

Aerobic Oxidative Synthesis of Formamides from Amines and Bioderived Formyl Surrogates.

Herein we present a new strategy for the oxidative synthesis of formamides from various types of amines and bioderived formyl sources (DHA, GLA and GLCA) and molecular oxygen (O2) as oxidant on g-C3N4 supported Cu catalysts. Combined characterization data from EPR, XAFS, XRD and XPS revealed the formation of single CuN4 sites on supported Cu(phen)2/C3N4 catalyst. EPR spin trapping experiments disclosed ●OOH radicals as reactive oxygen species and ●NR1R2 radicals being responsible for the initial C-C bond cleavage. Control experiments and DFT calculations showed that the successive C-C bond cleavage in DHA proceeds via a reaction mechanism co-mediated by ●NR1R2 and ●OOH radicals based on the well-equilibrated CuII and CuI cycle. Our system has much higher activity (TOF) than those using noble metals.

Low-cost pyrolysis of biomass-derived nitrogen-doped porous carbon: Chlorella vulgaris replaces melamine as a nitrogen source.

Porous carbon generated from biomass has a rich pore structure, is inexpensive, and has a lot of promise for use as a carbon material for energy storage devices. In this work, nitrogen-doped porous carbon was prepared by co-pyrolysis using bagasse as the precursor and chlorella as the nitrogen source. ZnCl2 acts as both an activator and a nitrogen fixer during activation to generate pores and reduce nitrogen loss. The thermal weight loss experiments showed that the pyrolysis temperatures of bagasse and chlorella overlap, which created the possibility for the synthesis of nitrogen-rich biochar. The optimum sample (ZBC@C-5) possessed a surface area of 1508 m2g-1 with abundant nitrogen-containing functional groups. ZBC@C-5 in the three-electrode system exhibited 244.1F/g at 0.5A/g, which was extremely close to ZBC@M made with melamine as the nitrogen source. This provides new opportunities for the use of low-cost nitrogen sources. Furthermore, the devices exhibit better voltage retention (39%) and capacitance retention (96.3%). The goal of this research is to find a low cost, and effective method for creating nitrogen-doped porous carbon materials with better electrochemical performance for highly valuable applications using bagasse and chlorella.

sRAGE levels are decreased in plasma and sputum of COPD secondary to biomass-burning smoke and tobacco smoking: Differences according to the rs3134940 AGER variant.

The receptor for advanced glycation end products (RAGE) and its gene (AGER) have been related to lung injury and inflammatory diseases, including chronic obstructive pulmonary disease (COPD). We aimed to evaluate the association of rs2071288, rs3134940, rs184003, and rs2070600 AGER single-nucleotide variants and the soluble-RAGE plasma and sputum levels with COPD secondary to biomass-burning smoke (BBS) and tobacco smoking. Four groups, including 2189 subjects, were analyzed: COPD secondary to BBS exposure (COPD-BBS, n = 342), BBS-exposed subjects without COPD (BBES, n = 774), tobacco smoking-induced COPD (COPD-TS, n = 434), and smokers without COPD (SWOC, n = 639). Allelic discrimination assays determined the AGER variants. The sRAGE was quantified in plasma (n = 240) and induced-sputum (n = 72) samples from a subgroup of patients using the ELISA technique. In addition, a meta-analysis was performed for the association of rs2070600 with COPD susceptibility. None of the studied genetic variants were found to be associated with COPD-BBS or COPD-TS. A marginal association was observed for the rs3134940 with COPD-BBS (p = 0.066). The results from the meta-analysis, including six case-control studies (n = 4149 subjects), showed a lack of association of rs2070600 with COPD susceptibility (p = 0.681), probably due to interethnic differences. The sRAGE plasma levels were lower in COPD-BBS compared to BBS and in COPD-TS compared to SWOC. The sRAGE levels were also lower in sputum samples from COPD-BBS than BBES. Subjects with rs3134940-TC genotypes exhibit lower sRAGE plasma levels than TT subjects, mainly from the COPD-BBS and SWOC groups. The AGER variants were not associated with COPD-BBS nor COPD-TS, but the sRAGE plasma and sputum levels are related to both COPD-BBS and COPD-TS and are influenced by the rs3134940 variant.

Multicriteria GIS-based assessment of biomass energy potentials in Nigeria.

The understanding of the geographical variability of biomass energy is an essential requirement for the optimal location of biomass energy conversion plants. This research presents a multicriteria GIS-based assessment of biomass energy potentials and the appropriate siting of biomass plants in Nigeria. The study applies the weighted overlay multicriteria decision analysis method. Crop and forest areas, settlement (energy supply areas), shrub/grasslands, barren land, water bodies, distance from water sources, road accessibility, topography, and aspect are the criteria that were considered for locating a biomass facility in this study. The results suggest that the theoretical, technical, and economical energy potentials of crop residues are highest in the North-East region of Nigeria and estimated at 1,163.32, 399.73, and 110.56 PJ/yr, respectively, and lowest in the South-East at 52.36, 17.99, and 4.98 PJ/yr, respectively. The theoretical, technical, and economical energy potentials of forest residues are highest in the North-West, estimated at 260.18, 156.11, and 43.18 PJ/yr, respectively, and lowest in the South-East at 1.79, 1.08, and 0.30 PJ/yr, respectively. Although most areas were identified to be suitable for siting biomass plants across Nigeria, the most suitable areas are located in the northern part of the country and include Niger, Zamfara, the Federal Capital Territory, Nassarawa, Kano, Kebbi, Kaduna, and Borno State. The study supports the Nigerian bio-energy policy that proposes to effectively utilize Nigeria's non-fuelwood as a substitute for the felling of trees. This is very important to strengthen its commitment at the COP26 International Climate Conference, which is to conserve and restore its forest. Furthermore, this study will serve as a good reference for policymakers to make well-informed decisions on tackling the energy insecurity in Nigeria.

The mechanism of solid acid-catalyzed bamboo sawdust liquefaction under polyol systems.

Solid acid catalysts are widely used in the field of biomass catalytic conversion owing to their advantages of low environmental pollution, easy separation and reusability. Nevertheless, there are relatively few studies on the mechanism of solid acid liquefaction for biomass. In this study, the effect of acid strength and acid amount of various solid acids on the liquefaction efficiency has been investigated using waste bamboo sawdust generated from the pulp and paper industry as the raw material. In addition, the physicochemical changes of cellulose, hemicellulose and lignin during the reaction process of bamboo sawdust have been studied, and the liquefaction mechanism of bamboo sawdust under the action of various solid acids has been concluded. As a result, the liquefaction efficiency of bamboo sawdust under the polyol system of PEG400/propanetriol is mainly related to the acid strength of the solid acid, and the greater the acid strength of the solid acid, the better the catalytic effect on the bamboo sawdust, in which the residual amount of bamboo sawdust liquefaction catalyzed by the SPA catalyst is only 17.72%. Noteworthy, the most difficult component to liquefy is the crystallization of natural cellulose I into cellulose II during the reaction process, which is the primary obstacle to the complete liquefaction of bamboo sawdust by solid acid. Overall, these findings are valuable for the high value utilization of waste bamboo sawdust in the pulp and paper industry, as well as the application of solid acid catalytic technology for biomass.

Arginine Acts as both Co-Solvent and Catalyst in Regioselective Eutectic-Mediated Dimerization of Levulinic Acid.

A simple, solvent-free arginine-catalyzed aldol dimerization of levulinic acid was achieved via the simultaneous formation of a eutectic mixture. Dimers of levulinic acid are valued as biomass-derived fine chemical precursors, with potential to upgrade to bio-jet fuels or N-containing functional chemicals. Typically, these dimers are produced as isomeric mixtures using high temperatures and a variety of solid inorganic catalysts or mineral acids. In this study, an organocatalytic and regioselective dimerization was achieved at 22% conversion on either a bench or kilogram scale using mild temperatures and only L-arginine as both a co-solvent and catalyst. The intricate H-bonding network comprising the eutectic solvent was harnessed to produce only one product, minimizing side reactivity and preserving the reactants for recycling.

Enhanced adsorption of phenolic compounds using biomass-derived high surface area activated carbon: Isotherms, kinetics and thermodynamics.

The progress of industrial and agricultural pursuits, along with the release of inadequately treated effluents especially phenolic pollutant, has amplified the pollution load on environment. These organic compounds pose considerable challenges in both drinking water and wastewater systems, given their toxicity, demanding high oxygen and limited biodegradability. Thus, developing an eco-friendly, low-cost and highly efficient adsorbent to treat the organic pollutants has become an important task. The present investigation highlights development of a novel adsorbent (CFPAC) by activation of Cassia fistula pod shell for the purpose of removing phenol and 2,4-dichlorophnenol (2,4-DCP). The significant operational factors (dosage, pH, concentration, temperature, speed) were also investigated. The factors such as pH = 2 and T = 20°C were found to be significant at 1.6 g/L and 0.6 g/L dosage for phenol and 2,4-DCP respectively. Batch experiments were further conducted to study isotherms, kinetic and thermodynamics studies for the removal of phenol and 2,4-DCP. The activated carbon was characterised as mesoporous (specific surface area 1146 m2/g, pore volume = 0.8628 cc/g), amorphous and pHPZC = 6.4. At optimum conditions, the maximum sorption capacity for phenol and 2,4-DCP were 183.79 mg/g and 374.4 mg/g respectively. The adsorption isotherm was better conformed to Redlich Peterson isotherm (phenol) and Langmuir isotherm (2,4-DCP). The kinetic study obeyed pseudo-second-order type behaviour for both the pollutants with R2 > 0.999. The thermodynamic studies and the value of isosteric heat of adsorption for both the pollutants suggested that the adsorption reaction was dominated by physical adsorption (ΔHx < 80 kJ/mol). Further, the whole process was feasible, exothermic and spontaneous in nature. The overall studies suggested that the activated carbon synthesised from Cassia fistula pods can be a promising adsorbent for phenolic compounds.

Progress in microwave absorbing materials: A critical review.

Microwave-absorbing materials play a significant role in various applications that involve the attenuation of electromagnetic radiation. This critical review article provides an overview of the progress made in the development and understanding of microwave-absorbing materials. The interaction between electromagnetic radiation and absorbing materials is explained, with a focus on phenomena such as multiple reflections, scattering, and polarizations. Additionally, types of losses that affect the performance of microwave absorbers are also discussed, including dielectric loss, conduction loss, relaxation loss, magnetic loss, and morphological loss. Each of these losses has different implications for the effectiveness of microwave absorbers. Further, a detailed review is presented on various types of microwave absorbing materials, including carbonaceous materials, conducting polymers, magnetic materials, metals and their composites, 2D materials (such as MXenes and 2D-transition metal dichalcogenides), biomass-derived materials, carbides, sulphides, phosphides, high entropy (HE) materials and metamaterials. The characteristics, advantages, and limitations of each material are examined. Overall, this review article highlights the progress achieved in the field of microwave-absorbing materials. It underlines the importance of optimizing different types of losses to enhance the performance of microwave absorbers. The review also recognizes the potential of emerging materials, such as 2D materials and high entropy materials, in further advancing microwave-absorbing properties.

Biomass fuels related-PM2.5 promotes lung fibroblast-myofibroblast transition through PI3K/AKT/TRPC1 pathway.

Emerging evidence has suggested that exposure to PM2.5 is a significant contributing factor to the development of chronic obstructive pulmonary disease (COPD). However, the underlying biological effects and mechanisms of PM2.5 in COPD pathology remain elusive. In this study, we aimed to investigate the implication and regulatory effect of biomass fuels related-PM2.5 (BRPM2.5) concerning the pathological process of fibroblast-to-myofibroblast transition (FMT) in the context of COPD. In vivo experimentation revealed that exposure to biofuel smoke was associated with airway inflammation in rats. After 4 weeks of exposure, there was inflammation in the small airways, but no significant structural changes in the airway walls. However, after 24 weeks, airway remodeling occurred due to increased collagen deposition, myofibroblast proliferation, and tracheal wall thickness. In vitro, cellular immunofluorescence results showed that with stimulation of BRPM2.5 for 72 h, the cell morphology of fibroblasts changed significantly, most of the cells changed from spindle-shaped to star-shaped irregular, α-SMA stress fibers appeared in the cytoplasm and the synthesis of type I collagen increased. The collagen gel contraction experiment showed that the contractility of fibroblasts was enhanced. The expression level of TRPC1 in fibroblasts was increased. Specific siRNA-TRPC1 blocked BRPM2.5-induced FMT and reduced cell contractility. Additionally, specific siRNA-TRPC1 resulted in a decrease in the augment of intracellular Ca2+ concentration ([Ca2+]i) induced by BRPM2.5. Notably, it was found that the PI3K inhibitor, LY294002, inhibited enhancement of AKT phosphorylation level, FMT occurrence, and elevation of TRPC1 protein expression induced by BRPM2.5. The findings indicated that BRPM2.5 is capable of inducing the FMT, with the possibility of mediation by PI3K/AKT/TRPC1. These results hold potential implications for the understanding of the molecular mechanisms involved in BRPM2.5-induced COPD and may aid in the development of novel therapeutic strategies for pathological conditions characterized by fibrosis.

Larval biomass production from the co-digestion of mushroom root waste and soybean curd residues by black soldier fly larvae (Hermetia illucens L.).

People are increasingly using black soldier fly larvae (BSFL) as a sustainable waste management solution. They are high in protein and other essential nutrients, making them an ideal food source for livestock, poultry, and fish. Prior laboratory studies with BSFL developed on pure mushroom root waste (MRW) showed poor conversion efficiency compared to a regular artificial diet. Therefore, we mixed the nutrient-rich soybean curd residues (SCR) with MRW in different ratios (M2-M5). Pure mushroom root waste (M1, MRW 100%) had the lowest survival rate (86.2%), but it increased up to 96.9% with the SCR percentage increasing. M1 had the longest developmental period (31.1 days) and the lowest BSFL weight (7.4 g). However, the addition of SCR reduced the development time to 22.0 and 21.5 days in M4 (MRW 40%, SCR 60%) and M5 (MRW 20%, SCR 80%), respectively, and improved the larval weight to 10.9 g in M4 and 11.8 g in M5. Other groups did not have as much feed conversion ratio (FCR) (8.4 for M4 and M5), bioconversion (M4 5.4%; M5 5.9%), or lipid content (M4 25.2%; M5 24.3%). These mixtures did. Compare this to M1. We observed better results, with no significant differences between the M4 and M5 groups and their parameters. In the present study, our main target was to utilize more MRW. Therefore, we preferred the M4 group in our nutritional and safety investigation and further compared it with the artificial diet (M7). The heavy metals and essential amino acids (histidine 3.6%, methionine 2.7%, and threonine 3.8%) required for human consumption compared to WHO/FAO levels showed satisfactory levels. Furthermore, fatty acids (capric acid 1.9%, palmitic acid 15.3%, oleic acid 17.3%, and arachidonic acid 0.3%) also showed higher levels in M4 than M7. The SEM images and FT-IR spectra from the residues showed that the BSFL in group M4 changed the structure of the compact fiber to crack and remove fibers, which made the co-conversion mixture better.

Exploring Carbonization Temperature to Create Closed Pores for Hard Carbon as High-Performance Sodium-Ion Battery Anodes.

Biomass-derived porous carbon materials are meaningful to employ as a hard carbon precursor for anode materials of sodium-ion batteries (SIBs) from a sustainability perspective. Here, a straightforward approach is proposed to develop rich closed pores in pinenut-derived carbon, with the aim of improving Na+ plateau storage by adjusting the pyrolysis temperature. The optimized sample, namely the pinenut-derived carbon at 1300 °C, demonstrates remarkable reversible specific capacity of 278 mAh g-1, along with a high initial Coulomb efficiency of 85% and robust cycling stability (with a capacity retention of 89% after 800 cycles at 0.2 A g-1). In situ and ex situ analyses unveil that the developed closed pores play a significant role in enhancing the plateau capacity, providing compelling evidence for the "adsorption-filling" mechanism. Moreover, the corresponding full-cell achieves a high energy density of 245.7 Wh kg-1 (based on the total weight of both electrode active materials) and exhibits outstanding rate capability (191.4 mAh g-1 at 3 A g-1).

Nanocellulose-Enhanced, Easily Processable Cellulose-Based Flexible Pressure Sensor for Wearable Epidermal Sensing.

Flexible pressure sensors (FPSs) based on biomass materials have gained considerable attention for their potential in wearable electronics, human-machine interaction, and environmental protection. Herein, flexible silver nanowire-dual-cellulose paper (SNdCP) containing common cellulose fibers, cellulose nanofibers (CNFs), and silver nanowires (AgNWs) for FPSs was assembled by a facile papermaking strategy. Compared with bacterial cellulose (BC) and cellulose nanocrystals (CNCs), CNFs possess better dimensions and reinforcement, which enables the composite paper to exhibit better mechanical properties (tensile stress of 164.65 MPa) and electrical conductivity (11600 S·m-1), providing more possibilities for FPSs. Benefiting from these advantages, we construct an easily processable and sensitive human-interactive FPS based on a composite paper with high sensitivity (0.050 kPa-1), fast response/recovery time (158/95 ms), and exceptional stability (>1000 bending cycles), capable of responding to finger motions, voice recognition, and human pulses; through further employment as the array unit and a control circuit, the observed highly adaptive mechano-electric transformability and functions are well maintained. Overall, a facile and versatile strategy with the potential to provide clues for the fabrication of cellulose-based FPSs with outstanding performance was introduced.

Atomic Ruthenium-Promoted Cadmium Sulfide for Photocatalytic Production of Amino Acids from Biomass Derivatives.

Amino acids are the building blocks of proteins and are widely used as important ingredients for other nitrogen-containing molecules. Here, we report the sustainable production of amino acids from biomass-derived hydroxy acids with high activity under visible-light irradiation and mild conditions, using atomic ruthenium-promoted cadmium sulfide (Ru1/CdS). On a metal basis, the optimized Ru1/CdS exhibits a maximal alanine formation rate of 26.0 molAla·gRu­1·h­1, which is 1.7 times and more than two orders of magnitude higher than that of its nanoparticle counterpart and the conventional thermocatalytic process, respectively. Integrated spectroscopic analysis and density functional theory calculations attribute the high performance of Ru1/CdS to the facilitated charge separation and O-H bond dissociation of the a-hydroxy group, here of lactic acid. The operando nuclear magnetic resonance further infers a unique "double activation" mechanism of both the CH-OH and CH3-CH-OH structures in lactic acid, which significantly accelerates its photocatalytic amination toward alanine.

Photosynthetic capacity and assimilate transport of the lower canopy influence maize yield under high planting density.

Photosynthesis is a major trait of interest for development of high-yield crop plants. However, little is known about the effects of high-density planting on photosynthetic responses at the whole-canopy level. Using the high-yielding maize (Zea mays L.) cultivars 'LY66', 'MC670', and 'JK968', we here conducted a two-year field experiment to assess ear development in addition to leaf characteristics and photosynthetic parameters in each canopy layer at four planting densities. Increased planting density promoted high grain yield and population-scale biomass accumulation despite reduced per-plant productivity. MC670 had the strongest adaptability to high-density planting conditions. Physiological analysis showed that increased planting density primarily led to decreases in the single-leaf area above the ear for LY66 and MC670 and below the ear for JK968. Furthermore, high planting density decreased chlorophyll content and the photosynthetic rate due to decreased canopy transmission, leading to severe decreases in single-plant biomass accumulation in the lower canopy. Moreover, increased planting density improved pre-silking biomass transfer, especially in the lower canopy. Yield showed significant positive relationships with photosynthesis and biomass in the lower canopy, demonstrating the important contributions of these leaves to grain yield under dense planting conditions. Increased planting density led to retarded ear development as a consequence of reduced glucose and fructose contents in the ears, indicating reductions in sugar transport that were associated with limited sink organ development, reduced kernel number, and yield loss. Overall, these findings highlighted the photosynthetic capacities of the lower canopy as promising targets for improving maize yield under dense planting conditions.

Soft Actuator with Biomass Porous Electrode: A Strategy for Lowering Voltage and Enhancing Durability.

Electroactive artificial muscles with deformability have attracted widespread interest in the field of soft robotics. However, the design of artificial muscles with low-driven voltage and operational durability remains challenging. Herein, novel biomass porous carbon (BPC) electrodes are proposed. The nanoporous BPC enables the electrode to provide exposed active surfaces for charge transfer and unimpeded channels for ion migration, thus decreasing the driving voltage, enhancing time durability, and maintaining the actuation performances simultaneously. The proposed actuator exhibits a high displacement of 13.6 mm (bending strain of 0.54%) under 0.5 V and long-term durability of 99.3% retention after 550,000 cycles (∼13 days) without breaks. Further, the actuators are integrated to perform soft touch on a smartphone and demonstrated as bioinspired robots, including a bionic butterfly and a crawling robot (moving speed = 0.08 BL s-1). This strategy provides new insight into the design and fabrication of high-performance electroactive soft actuators with great application potential.

Cultivation of the macrophyte Lemna minor and the microalgae Chlorella sorokiniana in thermal mineral waters: Biomass characteristics, radioisotopes and heavy metals content.

Microalgae and macrophytes are commonly used as human and animal food supplements. We examined the cultivation of the microalgae Chlorella sorokiniana and the duckweed Lemna minor in thermal waters under batch and sequencing batch conditions and we characterized the produced biomass for the presence of essential nutrients as well as for heavy metals and radioisotope content. The highest specific growth rate for the microalgae was observed when 5 or 15 mg/L N were supplemented while the optimal conditions for Lemna minor were observed in the co-presence of 5 mg/L N and 1.7 mg/L P. Lemna minor presented higher concentrations of proteins and lipids comparing to the studied microalgae. Both organisms contained high amounts of lutein (up to 1378 mg/kg for Lemna minor) and chlorophyll (up to 1518 mg/kg for Lemna minor) while ß-carotene and tocopherols were found at lower concentrations, not exceeding a few tens of mg/kg. The heavy metal content varied between the two species. Lemna minor accumulated more Cd, Cu, K, Mn, Na, Ni, and Zn whereas Al, Ca and Mg were higher in Chlorella sorokiniana. Both organisms could be a significant source of essential metals but the occasional exceedance of the statutory levels of toxic metals in food products raises concern for potential risk to either humans or animals. Application of gamma-spectroscopy to quantify the effective dose to humans from 228Ra, 226Ra and 40K showed that Chlorella sorokiniana was well under the radiological limits while the collected mass of Lemna minor was too small for radiological measurements with confidence.

Biomass patterns in Srivilliputhur Wildlife Sanctuary: exploring factors and gradients with machine learning approach.

Forest biomass plays a crucial role in the global carbon cycle as a significant contributor derived from both soil and trees. This study focuses on investigating tree carbon stock (TCS) and estimating aboveground biomass (AGB) based on elevation within the Srivilliputhur Wildlife Sanctuary forest, while also exploring the various factors that influence their contribution. Utilizing a non-destructive approach for carbon estimation, we found that the total tree biomass in this region ranged from 220.9 Mg/ha (in Z6) to 720.6 Mg/ha (Z2), while tree carbon stock ranged from 103.8 to 338.7 Mg/ha. While Kruskal-Wallis tests did not reveal a significant relationship (p = 0.09) between TCS and elevation, linear regression showed a weak correlation (R2 = 0.002, p < 0.05) with elevation. To delve deeper into the factors influencing TCS and biomass distribution, we employed a random forest (RF) machine learning algorithm, demonstrating that stand structural attributes, such as basal area (BA), diameter at breast height (DBH), and density, held a more prominent role than climatic variables, including temperature, precipitation, and slope. Generalized linear models (GLM) were also utilized, confirming that BA, mean DBH, and elevation significantly influenced AGB (p ≤ 0.001), with species richness, precipitation, and temperature having lower significance (p ≤ 0.01) comparatively. Overall, the RF model exhibited superior performance (R2 = 0.92, RMSE = 0.12) in terms of root mean square error (RMSE) compared to GLM (R2 = 0.88, RMSE = 0.35). These findings shed light on the intricate dynamics of biomass distribution and the importance of both stand structural and climatic factors in shaping forest ecosystems.

Photosynthetic physiological characteristics, growth performance, and element concentrations reveal the calcicole-calcifuge behaviors of three Camellia species.

We grew three yellow Camellia species (the calcifuge C. nitidissima and C. tunghinensis, and the calcicole C. pubipetala) in acidic and calcareous soils for 7 months and assessed their photosynthetic physiological characteristics, growth performance, and element concentrations in this developmental context. The calcifuge C. nitidissima and C. tunghinensis species exhibited poor growth with leaf chlorosis, growth stagnation, and root disintegration in calcareous soils, and with their P n, G s, T r, F v/F m, ΦPSII, ETR, qP, leaf Chla, Chlb, and Chl(a + b) concentrations, and root, stem, leaf, and total biomass being significantly lower when grown in calcareous soils relative to in acidic soils. In contrast, the calcicole C. pubipetala grew well in both acidic and calcareous soils, with few differences in the above parameters between these two soil substrates. The absorption and/or transportation of nutrient elements such as N, K, Ca, Mg, and Fe by the two calcifuge Camellia species plants grown in calcareous soils were restrained. Soil type plays a major role in the failure of the two calcifuge Camellia species to establish themselves in calcareous soils, whereas other factors such as competition and human activity are likely more important limiting factors in the reverse case. This study furthers our understanding of the factors influencing the distribution of these rare and endangered yellow Camellia species, allowing for improved management of these species in conservation projects and horticultural production.

Ammonia hydroxide and citric acid modified wheat straw-biochars: Preparation, characterization, and environmental applications.

This study presents an assessment of inorganic and organic modification of biochar on physicochemical properties, dissolved organic carbon (DOC) release, sorption efficiency towards enrofloxacin (E) and silver nanoparticles (Ag-NPs), as well as an evaluation of addition of prepared materials on hydro-physical properties and adsorption capacity of montmorillonite (M). The biochar was derived from wheat straw at 650 °C. An inorganic modification was performed using ammonia hydroxide, whereas an organic modification, using citric acid. The ammonia hydroxide and citric acid changed the biochar nature and surface chemistry by introducing amino and ester groups. The lowest DOC release was from ammonia-biochar (BCN) and the highest, from citric acid-biochar (BCC). The adsorption data were better described by pseudo-II order equation and Marczewski-Jaroniec isotherm. Results showed that BCN exhibited the highest efficiency in adsorption of E and Ag-NPs. It also improved the adsorptive abilities and saturated hydraulic conductivity of M. This provides the chemically modified biochars have an excellent potential to improve pollution removal from aqueous media and hydro-physical/sorption properties of soil sorption complex. They can be used with advantageous in environmental applications.